+44 (0)1495 320 989

Low Pressure Overmoulding

Overmoulding is the process of surrounding a component with plastic. Here at Swan EMS we utilize a low pressure molding process to create our over-molded assemblies.

Overmoulding is ideal for D-Types, Circular Connectors such as DIN, M8, M12, ODU, etc.. and gives a professional finish to the cable assembly.


See some examples of moulding, particularly on the M8/M12 sensor harnessing range

 

REEF Connector 

M8 female receptacles are ideal for adding connectivity solutions to panels.

The M8 female receptacle is available in both 3 and 4 pole versions.  The mounting thread for the connector uses an M8 x 0.5 thread and is supplied with o-ring for sealing to your panel.  Please note the lock nut is supplied seperately.

 
 RELF Connector

M8 3 and 4 pole female straight moulded connectors with choice of PVC or PUR/PVC cable.

Designed to IEC61076-2-104, this round M8 connector has an integrated nickle plated brass coupling nut and is available in 3 or 4 pole format.  The body is moulded from TPU (Polyurethane) providing this connector with good chemical and abrasion resistance as well as it being sealed waterproof to IP68.  Other cable types and lengths are available on request.

 
 RELM

M8 3 and 4 pole male straight moulded connectors with rotating coupling nut that is ideal for splitter boxes or use with panel mount receptacles.

The male version of the M8 connectors features a rotating nickel plated brass coupling nut that enables the connectors use with fixed female threads as found on splitter boxes and receptacles.  They designed to IEC61076-2-104 and are available in 3 or 4 pole format.  The body is moulded from TPU (Polyurethane) providing this connector with good chemical and abrasion resistance as well as it being sealed waterproof to IP68.  Other cable types and lengths are available on request.  
 REMF  

M8 3 and 4 pole female 90º or right angle moulded connectors with choice of PVC or PUR/PVC cable.

Like all our M8 products they are designed to IEC61076-2-104, this right angle version of the M8 connector has an integrated nickle plated brass coupling nut and is available in 3 or 4 pole format.  The body is moulded from TPU (Polyurethane) providing this connector with good chemical and abrasion resistance as well as it being sealed waterproof to IP68.  Other cable types and lengths are available on request.
 REMF6  

M8 3 pole connector with LED indication of power and switch status.

This M8 LED connector is only available in the 3 pole format and is designed for use with standard proximity switches.  The Green LED indicates power to the switch, while the Amber LED shows the output status of the switch.  This moulded connector is sealed waterproof to IP68.  Other cable types and lengths are available on request.
 RENM  

M8 3 and 4 pole male 90º or right angled moulded connectors have rotating coupling nut for use with splitter boxes and panel mount receptacles.

As with the straight version of this connector, the male version of the M8 connectors features a rotating nickel plated brass coupling nut that enables the connectors use with fixed female threads as found on splitter boxes and receptacles.  They designed to IEC61076-2-104 and are available in 3 or 4 pole format.  The 90º or right angle body is moulded from TPU (Polyurethane) providing this connector with good chemical and abrasion resistance as well as it being sealed waterproof to IP68.  Other cable types and lengths are available on request.

 

This is a specialist service that Swan EMS can undertake. If you have a requirement for this for your cables please contact us to talk it through and find the most cost efficient way to carry this out.